PSG52GX　chuck size　500×200mm
PSG63GX　chuck size　600×300mm
PSG64GX　chuck size　600×400mm
PSG65GX　chuck size　600×500mm
PSG84GX　chuck size　800×400mm
PSG105GX　chuck size　1,000×500mm

A minor change model of a long-selling machine that has been supported by global users, with shipments of over 20,000 units.

・Stainless steel covers are used as standard, extending the service life of the machine covers.

・Equipped with a standard automatic grinding cycle of “rough grinding ⇒ fine grinding ⇒ spark out.”

・Lubrication/hydraulic pumps are installed outside the machine, and each tank is separated so that lubricating oil and hydraulic oil can be replaced separately.

・The adoption of manual pulsing for up and down feed operation on the operation panel has refreshed the image of general-purpose machines.

・AC servo motors are used for vertical movement, allowing selection of minimum cutting amounts from 0.1 μm.

・The current position indicator for up/down and forward/backward is digitally displayed by LED (forward/backward display is optional) as standard.

・The left and right sliding surfaces adopt a V-V structure scraper guide surface. By suppressing imbalance caused by oil film floating, straightness is improved, enabling higher precision processing.